Click picture for a larger view.
Spectral Motion Inc.
The Makers Of Alex The Vampire
Limited Edition of 1000
Solid Resin Model Kit
11 1/2 Inches Tall!
Signed And Numbered Base
Certificate Of Authenticity
Boar Bristles For Whiskers
Pre-Painted Buildups By Tom Gilliland Available (contact us for details)
For Visa or Mastercard orders:
For questions or comments:
® Boris The Werewolf is a registered trademark of Spectral Motion Incorporated.
All rights reserved.
Remove & Sand Excess Material From All Parts
Resin kits are shipped with excess material as a result of the casting process. This material must be carefully cut away with a hobby knife or saw and sanded with a rotary sanding tool such as a "Dremel" Moto tool. This step should be accomplished while using a dust mask in a well ventilated area.
Wash, Rinse & Dry All Parts
Using dish washing detergent or other mild soap, thoroughly wash all parts to remove separating agent. Rinse and allow to air dry. A blow dryer may be used to speed the process. This step will ensure good paint adhesion.
Carefully pre-fit all parts, sanding as necessary, to provide a good fit. Refer to illustration for placement. Glue the parts together with a cyanoacrylate adhesive such as "Crazy Glue" or other C.A. adhesive (available at hobby stores). Pinning together with 1/8" brass rod before gluing is recommended but entirely optional. Once your model is assembled you can fill the gaps with epoxy putty (also available at hobby stores). Sand putty and prep for painting
Paint & Finishing Touches
Now you can paint your kit to your liking. The final look of your kit is entirely up to you so use your imagination! Detailed instructions on painting can be obtained from many sources such as model kit magazines or courses on video tape. Ask your model kit dealer for information if you need to know more.
Once you have finished painting, attach the included whiskers (horse hair) with cyanoacrylate.
Copyright © 1994-1997 Firefly Design.